Central Vacuum Systems
What is a Central Vacuum System?
In a central vacuum system a central power unit sits in an out-of-the-way area such as your garage, basement or utility room. Wall inlet valves are then installed in various locations throughout the home and connected to the power unit through tubing. After installation, the system can be activated by simply plugging the lightweight hose into a wall inlet. The system then carries the dirt, dust, animal dander and allergens out of the room into the main power unit and deposits all of the debris into the canister.
Return to Top Of Page
Can They Be Installed In Existing Homes or Just New Homes?
 Central vacuum systems can be installed in new or existing homes. In an existing home, tubing can be run through the attic, basement or closets - then dropped behind interior walls to complete the installation. In a new home tubing can be added before the walls are finished.
Return to Top Of Page
Why Should I Install a Central Vacuum System?
- Reduces allergic reactions — Won't recirculate dust like standard vacuums
- Alleviates back strain — No more lugging around that heavy vacuum from room to room. Central vacuum systems eliminate the need to haul heavy and awkward canisters up and down stairs and through the house.
- More Power- Central vacuum system provide up to three times more cleaning power than canisters or uprights because they are built with larger, more rugged motors.
- Operates quieter than standard vacuum cleaners
- Flexible- Attachments available for virtually every situation
- Save time- Large-capacity bag and bagless vacuum units are available with easy-to-change bags
- Adaptable-Easy retrofit installation, or perfect for existing homes or new construction
Return to Top Of Page
How Do I Design the Right System For My Needs?
Wall inlet valves should be installed based on your household cleaning needs, the number of stories. Just be sure inlet valves are strategically placed to reach all areas of your home with a standard 30-ft. hose. Walls and furniture can shorten the distance serviced by a valve in some areas, so be sure to locate inlets with furniture and walls in mind.
Most central vacuum manufacturers produce three or four styles that range in power, size and price. Though they are typically rated by air flow, air power or horse power, these measurements have little to do with effective suction. Perhaps the most reliable measurement is "waterlift"-- a test of a sealed system's sucking power (though these vacuums are not meant to be used with water). As a rule of thumb, most smaller systems, with a waterlift of from 105 inches to 120 inches, will handle a 2500 square foot house.
A qualified VBFAA member central vacuum installer can help you to determine the best plan for your home.
Return to Top Of Page
|
